Identify Results
Area Analyzer
Selected Point Summary
Selected Point
Area Analyzer

Atlas Guide

Use the atlas to explore recent climate, follow future climate scenarios through time, examine detailed future maps, and compare mapped risks around cultural heritage.

Recent Climate Period

Explore mapped recent climate and environmental conditions, including temperature, precipitation and solar radiation. Layer names identify the month, season or annual summary where available.

Switch on layers, read their legends and click a location to inspect values. Use Swipe compare to examine two catalogue layers across the same area. Draw or upload a polygon for area statistics.

Climate Scenario Time Series

Explore how climate changes through time at a selected location. Future values combine eight CMIP6 models into one ensemble product, after monthly Quantile Delta Mapping (QDM) bias adjustment against observed climate.

The prepared product uses a 0.1° grid, approximately 10 km in resolution; cell dimensions vary with latitude. Choose a parameter and click the map for annual observations, or select an SSP and future period for projections, model spread and period maps.

High-Res Scenario Maps

Examine future climate in greater spatial detail using 600 × 600 m raster cells. These maps support analysis of local patterns and selected areas under SSP2-4.5 and SSP5-8.5.

Choose a parameter, scenario and period, then click a point or analyze a polygon. The interactive maps show annual conditions for 2021–2040, 2041–2060 or 2081–2100. Seasonal maps (PDF) provides downloadable overview maps for all seasons and these three periods.

Climate Risk Vulnerability

Explore future flood, landslide and wildfire risk layers. The catalogue distinguishes SSP2-4.5 and SSP5-8.5 and the near-, mid- and long-term horizons shown in the layer names.

Inspect risk values at a point, use Swipe compare to compare two catalogue layers, or analyze a drawn or uploaded polygon. Read each layer's legend to interpret its classes and values.

Data and coverage

Recent observations
E-OBS gridded observations for 1950–2024, presented as annual time series.
Scenario time series
Eight CMIP6 models, corrected individually with monthly QDM and combined on a 0.1° grid, approximately 10 km. Annual projections are displayed from 2022 to 2100; cell dimensions vary with latitude.
Detailed scenario maps
Separate 600 m annual rasters for SSP2-4.5 and SSP5-8.5, with seasonal overview maps available as PDF.
Units
Annual temperature is expressed in °C and annual precipitation in mm/year. For other catalogue or uploaded layers, check the layer's legend and unit.

Tools available in each workspace

Workspace Point values Annual chart Swipe compare Area Analyzer Local uploads
Recent Climate Period Yes — Yes Yes Yes
Climate Scenario Time Series Yes Yes — — —
High-Res Scenario Maps Yes — — Yes Yes
Climate Risk Vulnerability Yes — Yes Yes Yes

How the scenario time series are prepared

The eight models are processed individually before their results are combined. The preparation includes:

  1. Prepare comparable inputs. Historical and future simulations are converted to consistent units and monthly data, accounting for the models' different calendars.
  2. Use a common reference grid. Model fields are brought onto the E-OBS 0.1° grid used for the observed reference.
  3. Apply monthly QDM. Each model's historical simulation is compared with E-OBS observations over a common historical reference period. QDM adjusts systematic differences in their distributions with the aim of retaining the modelled climate-change signal.
  4. Calculate annual results. Corrected monthly values are aggregated into annual temperature averages and precipitation totals.
  5. Combine the eight models. The central result is the ensemble median (P50), with P10–P90 showing model spread. For period maps and summaries, each model is first averaged over the selected period, then the ensemble statistics are calculated.
Eight models in the ensemble

CNRM-ESM2-1, EC-Earth3-CC, IPSL-CM6A-LR, MIROC6, MPI-ESM1-2-HR, MPI-ESM1-2-LR, NorESM2-MM and UKESM1-0-LL.

This preparation describes the Climate Scenario Time Series product. High-Res Scenario Maps provides the separate 600 m future raster product for detailed spatial analysis.

Choose a scenario and period

The two climate-scenario workspaces offer SSP2-4.5, an intermediate-emissions pathway, and SSP5-8.5, a very-high-emissions pathway. Both start without a parameter or SSP selected.

In Climate Scenario Time Series, Recent opens the observed 1950–2024 series and does not require an SSP. For future results, choose a parameter, SSP and period, then click the location you want to explore.

Time-series period maps cover 2021–2040, 2041–2060, 2061–2080 and 2081–2100. High-Res Scenario Maps has three periods: 2021–2040, 2041–2060 and 2081–2100. Clicking an active parameter card clears it; in High-Res Scenario Maps, the active SSP card can also be cleared this way.

Read the time-series chart

The chart shows annual conditions at the selected grid cell. The future line is the median of the eight corrected models; the shaded P10–P90 band shows their spread, rather than a confidence interval. Trendline shows or hides the fitted trends.

Combined charts show observations through 2021 and projections from 2022 onward. The separate Recent view retains observations through 2024. Near-term maps and summaries use the full modeled 2021–2040 period.

Selecting a future period changes the map and period summary and outlines that window on the chart. The full annual series remains visible. Temperature is in °C; annual precipitation is in mm/year. Minimum and maximum temperature describe averages of daily minima and maxima, not the single coldest or hottest day.

Coverage depends on the dataset. The detailed scenario maps and annual scenario time series use different grids. Blank areas can indicate missing values or locations outside the selected dataset's coverage.

Compare maps and analyze an area

Climate Risk Vulnerability offers a Recent period map first in each hazard group, alongside SSP2-4.5 and SSP5-8.5 future maps. Recent risk maps use the same five risk classes and colors; no year range is assigned to this product.

Swipe compare is available in both Recent Climate Period and Climate Risk Vulnerability. Open the comparison tool, choose two catalogue layers, enable Swipe compare, and drag the divider across the map to compare the same location in both layers.

The Area Analyzer is available in Recent Climate Period, High-Res Scenario Maps and Climate Risk Vulnerability. Use Draw analysis area or the map's analyzer tool, mark your boundary, and use the active tool button to finish. Review the mean, minimum, maximum and count shown for each result. The count identifies the raster values or sample points used.

For the detailed scenario maps, area statistics use the original 600 m raster grid. Uploaded GeoTIFF statistics use the uploaded raster's source values. Finish or switch off the drawing tool to resume normal point selection.

Work with your own spatial data

Use Add local spatial data in Recent Climate Period, High-Res Scenario Maps or Climate Risk Vulnerability. Add GeoJSON, Shapefile, GeoPackage or GeoTIFF files. For a Shapefile, select matching .shp, .shx, .dbf and .prj files together, or upload one ZIP containing them.

A file uploaded in any of these three workspaces appears in all three during the same session. Each map keeps its own visibility, opacity and raster band/unit controls. Zoom and feature selection affect the current map; Remove deletes the layer from all three workspaces.

Click an uploaded vector feature to inspect its attributes, or open its Attributes table to search and select a feature. Polygon Info displays its attributes. In Area Analyzer, choose Analyze this polygon to use the selected polygon as the analysis area. Uploads are temporary and available only in your current session.

Download results

  • Time series and charts. In Climate Scenario Time Series, download the selected point series as CSV. Open the chart menu to export an image as PNG, JPEG or SVG.
  • Area summaries. Use the Area Analyzer export to download an Excel workbook for your selected polygon.
  • Seasonal overview maps. In High-Res Scenario Maps, open Seasonal maps (PDF) and choose the SSP2-4.5 or SSP5-8.5 document. Each low-resolution PDF includes all seasons and three future periods, independently of your current map selection.

Find the map tools

Map borders, directly below each map sidebar heading, shows or hides the basemap's administrative boundary lines. Each workspace keeps its own setting, including both sides of Swipe compare. The setting also applies after changing the basemap. Satellite imagery has no built-in boundary lines.

Open Map Tools Guide in the navigation for help with map search, basemaps, measurement, layer comparison and area analysis. The information buttons beside controls and panel headings explain the feature you are using.

How to Cite

Citation is mandatory when using the STECCI Digital Climate Atlas or its outputs.

REQUIRED CITATION

Drešković, N., Radulović, S., Hrelja, E., & Radulović, B. (2026). STECCI Digital Climate Atlas [Interactive web-based GIS application]. Horizon Europe STECCI Project, Grant Agreement No. 101094822.

About STECCI Digital Atlas

The STECCI Digital Atlas brings together climate, geospatial, risk, and vulnerability information in one interactive application.

It is designed to help users explore changing environmental conditions around cultural heritage through maps, time series, and spatial analysis.

Purpose and scope

The atlas supports the exploration of climate conditions and climate-related risks around cultural heritage across Europe. It brings together recent climate maps, future scenario time series, detailed scenario maps and heritage-risk information in distinct workspaces.

Atlas Guide explains the datasets, coverage, methods and interpretation of results. Map Tools Guide provides a quick reference for the map controls.

Project and acknowledgements

Scientific Coordination and Data Processing
Nusret Drešković · Snežana Radulović · Edin Hrelja
Software Development and Data Processing
Božidar Radulović

The atlas was developed by the University of Sarajevo (UNSA) and the Faculty of Sciences, University of Novi Sad (PMF), within the Horizon Europe STECCI project.

Funding: European Union, Horizon Europe, Grant Agreement No. 101094822 .

Visit the STECCI project website

Your uploaded data

Local spatial uploads are available only during the current session and are not added to the platform's permanent map catalogue.

How to Cite

Citation is mandatory when using the STECCI Digital Climate Atlas or its outputs.

REQUIRED CITATION

Drešković, N., Radulović, S., Hrelja, E., & Radulović, B. (2026). STECCI Digital Climate Atlas [Interactive web-based GIS application]. Horizon Europe STECCI Project, Grant Agreement No. 101094822.